Joysense Aluminum Type MC Cable is constructed with Type XHHW-2 conductors
rated 90℃ wet or dry,and a bare equipment grounding conductor. The Conductors are AA-8000
series Aluminum Alloy compact stranded. A binder tape is wrapped over the conductors with
interlocked aluminum tape applied over the assembly. Aluminum interlocking armor is applied
over the assembly. Refer to color chart for conductor color sequence.
Joysense Aluminum Type MC Cable;
The Conductors are AA-8000 series Aluminum Alloy compact stranded;
Cross-linked Polyethylens Insulated Singles Rated XHHW-2;
Lightweight Aluminum Interlocked Armor;
Installation in cable tray and approved raceways.
|
|
APPLICATIONS suitable for use as follows: |
|
· Branch, feeder and service power distribution under high ambient temperatures
in commercial, industrial, institutional, and multi-residential buildings
· Power, lighting, control, and signal circuits
· Fished or embedded in plaster
· Concealed or exposed installations
· Environmental air-handling spaces per NEC©300.22(c)
· Places of Assembly per NEC®518.4 and theaters per NEC®520.5
· As aerial cable on a messenger
· Installation in cable tray and approved raceways
· Under raised floors for information technology equipement conductors and
cables per NEC®645.5(D)&645.(D)(2)
· Class ⅠDiv.2, Class ⅡDiv.2,Class Ⅲ Div.1 Hazardous Locations |
|
STANDARDS&REFERENCES |
|
Joysense Aluminum Type MC Cable with tripele e® Aluminum Alloy
Meets or exceeds the requirements of UL Standard 44,UL Standard
1569 for Type MC, ICEA S-95-658(NEMAWC70)for O-2000 V Nonshielded
Cables, Federal Specification A-A59544(formerly J-C-30B),IEEE
1202(70,000BTU/hr) Vertical Cable Tray Flame Test, and the American
Electrical CODE®. Joysense Aluminum Type MC Cable with triple e®
Aluminum Alloy is listed for use in UL 1,2,and 3 Hour Through
–Penetration Firestop Systems. |
|
CONSTRUCTION |
|
Joy Sense Aluminum Type MC Cable is constructed with Type XHHW-2 conductors rated 90℃ wet or dry, and a bare equipment grounding
conductor. The Conductors are AA-8000 series Aluminum Alloy compact
stranded. A binder tape is wrapped over the conductors with
interlocked aluminum tape applied over the assembly. Aluminum
interlocking armor is applied over the assembly. Refer to color
chart for conductor color sequence. |
|
FEATURES |
|
· UL Classified 1,2,and 3 Hour Through-Penetration Firestop Systems:W-J-3037,
W-L-3110,W-L-3113,W-L-3117,W-L-3120,W-L-3121,W-L-3160,C-AJ-3115,C-AJ-3140,
C-AJ-3142,C-AJ-3145,C-AJ-3173,C-AJ-3202,C-AJ-4065,C-AJ-4066,F-C-3038
· Cable reverse wound on reel for ease of pulling and installation.When pulling
from coils,pull from inside to ensure ease of installation
· Anti-short bushings are not required for use with MC cable per the NEC® and UL |
|
